A planetary gearbox shares the load between several planet gears that rotate around a central sun gear, so it delivers high torque and low backlash from a compact housing. It is the standard choice for precise positioning on servo-driven machines, CNC machine tools and robots, and for high-torque drives in heavy industry.
As the Turkey distributor of Kofon, Tramec and Reggiana, General Reduktor supplies planetary gearboxes from 3 arcmin servo units up to industrial drives rated at 2,400,000 Nm. Tell us about your application and our engineers will help you choose the right series.
Request a quote and technical support → · +90 232 700 22 77 · WhatsApp
- Servo and precision applications: Kofon and Tramec planetary gearboxes
- Right-angle (90°) mounting: Kofon KVX and Tramec TEP
- Heavy industry and high torque: Reggiana planetary gearboxes
Choosing a planetary gearbox for your application
Two questions narrow the choice quickly: is the motor a servo or an induction motor, and do you need precise positioning or very high torque? The table shows which series fits where. Full technical data is on each product page and in the catalogues.
| Application | Recommended series | Design | Key figure |
|---|---|---|---|
| Servo motors, CNC, automation | Kofon KPL, KPE | In-line, round flange | Ratio 3–64, backlash P0: 3–6 arcmin |
| Servo motors, square flange mounting | Kofon KPLF, KPX | In-line, square flange | Ratio 3–64, backlash P0: 3–6 arcmin |
| Servo axes needing a high ratio | Kofon KPG | In-line, square flange | Ratio 3–100 |
| Axes needing a flange output | Kofon KPH, KPLN | Flange output | Ratio 3–64 |
| Right-angle mounting in tight spaces | Kofon KVX, Tramec TEP | Right angle (90°) | KVX ratio 3–64. TEP: sizes 55, 75, 90, 120 |
| Robotics, manipulators, high precision | Tramec MTA | In-line, 1–2 stages | Ratio 3:1–100:1, five sizes from 16 to 55 |
| Packaging, woodworking, printing machines | Tramec EP, REP | In-line | Price/precision balance. REP: 1–3 stages, sizes 75–150 |
| Mining, marine, heavy industry | Reggiana PLUS | Planetary, 18 sizes | 25,000 – 2,400,000 Nm |
| Modular industrial drives | Reggiana 2000 | In-line and bevel planetary | 10 gear sizes, many output options |
Not sure which one fits? Send us the motor type, required output torque and speed, and we will recommend the series and size.
Precision planetary gearboxes for servo motors
In servo applications the key figure is backlash: the small free movement of the output shaft when it changes direction. It is measured in arcmin (one sixtieth of a degree). The lower the backlash, the more repeatable the positioning.
Kofon planetary gearbox series
Kofon Motion Group was founded in Korea in 1996. Its helical-gear planetary gearboxes are used in servo-driven applications. Shared values across the range:
- Single-stage ratios 3, 5, 7, 10 and two-stage ratios 15–64 (up to 100 on KPG)
- Nominal input speed 3000 rpm
- High-precision class P0: 3–6 arcmin, standard class P1: 5–8 arcmin
- Emergency stop torque: 3 × nominal output torque
The series differ in how they mount: KPL and KPE have a round flange, KPLF, KPX and KPG a square flange, KPH and KPLN a flange output, and KVX is right-angle. See all series on the Kofon Motion gearboxes page.
Tramec MTA, EP, REP and TEP series
Tramec MTA comes in five sizes (16, 22, 32, 40, 55) with ratios from 3:1 to 100:1 and is built for applications where precision comes first, such as robotics and manipulators. The EP and REP series balance price and precision for packaging, woodworking, printing and transfer machines. TEP is the right-angle version of the same approach. Other Tramec products are on the Tramec Riduttori page.
High-torque planetary gearboxes for heavy industry
On conveyors, cranes, mixers and mining equipment the priority is not precision but very high torque from a small housing. Because a planetary design splits the load across several gears, it suits this job well.
The Reggiana PLUS series is built in 18 sizes covering 25,000 Nm to 2,400,000 Nm and is designed for mining, marine and heavy industrial use. The Reggiana 2000 series offers a modular solution with in-line and bevel planetary designs, 10 gear sizes and many output options. See all series on the Reggiana Riduttori page.
How does a planetary gearbox work?
The motor drives the central sun gear. The planet gears around it roll inside a fixed outer ring gear and turn the carrier that holds them. The output shaft is connected to the carrier, so speed drops and torque rises.
Because the load is shared by three or more planet gears instead of one, the housing stays compact and the input and output shafts sit on the same axis. Read more in our article on the design of planetary gearboxes.
What to check when choosing a planetary gearbox
If you include the following in your enquiry, we can recommend the right size straight away:
- Motor type and power: servo, stepper or induction. For servo motors, the motor flange and shaft diameter.
- Required output torque and speed: or the load and motion profile.
- Ratio: the difference between motor speed and required output speed.
- Backlash requirement: P0 for precise positioning, P1 is usually enough for general automation.
- Mounting: in-line or right-angle, shaft output or flange output.
- Radial and axial loads: if a pulley, gear or arm is mounted on the output shaft.
- Operating conditions: daily running time, shock loads, ambient temperature.
To make selection easier we also provide 3D models and catalogues.
Why General Reduktor?
- Distributor: we are the Turkey distributor of Kofon, Tramec and Reggiana.
- One supplier: alongside planetary gearboxes you can source motors, brakes and other gearbox types from more than 20 brands. See our brands.
- Engineering support: our technical sales team reviews your application, calculates size and ratio and compares alternative series.
Frequently asked questions
What is the difference between a planetary gearbox and a worm gearbox?
In a planetary gearbox the input and output are on the same axis. Efficiency is high and backlash is low, which suits servo applications. In a worm gearbox the output is at 90°. High ratios are reached in a single stage, but efficiency is lower. If you need both 90° and precision, right-angle planetary series (Kofon KVX, Tramec TEP) are a good middle ground.
Which planetary gearbox should I choose for a servo motor?
It depends on the motor flange and the backlash you need. Kofon KPL or KPE are common for round flanges, KPLF, KPX or KPG for square flanges, and Tramec MTA for high-precision work such as robotics. Send us your motor model and we will confirm the matching size.
What do backlash and arcmin mean on a planetary gearbox?
Backlash is the small angular movement the output shaft can make while the input is held still. It is measured in arcmin, and 1 arcmin is one sixtieth of a degree. For example, Kofon’s P0 class is 3–6 arcmin and P1 class 5–8 arcmin. Lower backlash means smaller positioning error.
What affects the price of a planetary gearbox?
The main factors are housing size, number of stages (ratio), precision class (P0 or P1), mounting (in-line or 90°), motor adapter and order quantity. That is why we quote for each application instead of publishing a fixed price list.
When is a right-angle planetary gearbox used?
When the motor has to sit parallel to the machine frame or length is limited. Right-angle planetary gearboxes combine the precision of in-line planetary units with a 90° output. We recommend Kofon KVX and Tramec TEP for this.
Request a planetary gearbox quote
Send us your motor details, the required torque and speed, or the nameplate of your current gearbox. We will tell you the matching Kofon, Tramec or Reggiana series and the delivery time.
Contact form → · +90 232 700 22 77 · WhatsApp · info@generalreduktor.com